How to Power off and Restart the Miner

Apply to S9, T9, R4, L3, L3 +

1. Power off the Miner

As the miner is directly connected with the PSU, and there is no switch button on the miner, you only need to pull the PSU line to power off the miner.

2. Restart the Miner

There are two ways to restart the miner; first is to power off the miner, and after 2 minutes power on again; the second is to click “Reboot” in the webpage as following.

 

 

Have more questions? Submit a request

1 Comments

  • 0
    Avatar
    t.selalmasidis

    The proper way to shutdown an antminer is to connect to it using ssh and enter the command `poweroff`. The fans won't stop but after a few minutes you will notice that the miner cools down and then you can securely unplug it

    Edited by t.selalmasidis
Article is closed for comments.